Question 1

If the walls are to be covered with stucco or masonry veneer, this material is outside the ________ face of the wall frame.

Accepted Answer

A)   dimensioned
B)   building
C)   inside
D)   None of these are correctE) None of the above
F) B) and D)

Question 2

Architectural features such as exposed beams, arches in doorways, or unusual roof lines may be shown by ____ lines.

Accepted Answer

A)   leader
B)   dimension
C)   cutting-plane
D)   phantomE) C) and D)
F) None of the above

Question 3

One type of foundation has a concrete base, called the ____, supporting foundation walls.

Accepted Answer

A)   heading
B)   reinforcement
C)   footing
D)   slabE) None of the above
F) All of the above

Question 4

The lengths of the boundaries are noted ____.

Accepted Answer

A)   on a legend
B)   on a separate sheet
C)   next to the line symbol
D)   on top of the line symbolE) All of the above
F) B) and D)

Question 5

A(n)  ____ plan gives information about the site on which the building is to be constructed.

Accepted Answer

A)   floor
B)   architectural
C)   foundation
D)   siteE) None of the above
F) All of the above

Question 6

The Committee on the Environment was formed in 1989 by the ____.

Accepted Answer

A)   EPA
B)   U.S. Department of Energy
C)   American Institute of Architects
D)   U.S. Green Building CouncilE) All of the above
F) C) and D)

Question 7

The girder is shown on the foundation plan by ____ lines and a note describing it.

Accepted Answer

A)   dimension
B)   extension
C)   phantom
D)   leaderE) C) and D)
F) B) and C)

Question 8

Floor plans show how the building is divided into rooms and how to get from one room to another.

Accepted Answer

A) True 
 B)False

Question 9

On frame construction, exterior walls are usually dimensioned to the ____.

Accepted Answer

A)   foundation
B)   electrical outlets
C)   inside face of the wall framing
D)   outside face of the wall framingE) A) and B)
F) All of the above

Question 10

Surveyors and engineers usually work with feet and inches.

Accepted Answer

A) True 
 B)False  False

Question 11

Each floor of the building ____.

Accepted Answer

A)   is shown on the same plan
B)   is shown on a separate plan
C)   must have the same floor plan
D)   is shown on the foundation planE) A) and B)
F) All of the above

Question 12

The lengths of the boundaries are noted next to the ___________ symbol.

Accepted Answer

A)   line
B)   hash
C)   arrow
D)   slashE) All of the above
F) B) and C)

Question 13

When the footing-and-wall-type foundation is used, ____ are used to provide intermediate support to the structure above.

Accepted Answer

A)   rebars
B)   slabs
C)   girders
D)   columnsE) A) and D)
F) All of the above C

Question 14

The property line is usually a ____.

Accepted Answer

A)   dotted line
B)   heavy line
C)   thin dashed line
D)   thin solid lineE) B) and C)
F) A) and B)

Question 15

____ are given for the sizes and locations of all walls, partitions, doors, windows, and other important features.

Accepted Answer

A)   Dimensions
B)   Plans
C)   Leaders
D)   Source materialsE) C) and D)
F) B) and C)

Question 16

Cabinets are explained further by ____.

Accepted Answer

A)   leader lines
B)   elevations and details
C)   site plans
D)   noting their method of manufactureE) A) and B)
F) A) and C)

Question 17

A floor plan is a(n)  ____ view taken at a height that shows the placement of walls, windows, doors, cabinets, and other important features.

Accepted Answer

A)   front
B)   foundation
C)   section
D)   elevationE) C) and D)
F) None of the above

Question 18

Site dimensions are usually stated in ____.

Accepted Answer

A)   whole inches
B)   tenths or hundredths of feet
C)   feet and inches
D)   metersE) B) and D)
F) B) and C)

Question 19

The floor plan includes as much information as possible without making it cluttered and hard to read.

Accepted Answer

A) True 
 B)False  True

Question 20

Windows and doors may be dimensioned about ____.

Accepted Answer

A)   the closest receptacle
B)   the wall framing
C)   their dimension lines
D)   their centerlinesE) B) and D)
F) C) and D)

Exam 6: Plan Views

If the walls are to be covered with stucco or masonry veneer, this material is outside the ________ face of the wall frame.

Correct AnswerverifiedShow Answer

Architectural features such as exposed beams, arches in doorways, or unusual roof lines may be shown by ____ lines.

Correct AnswerverifiedShow Answer

One type of foundation has a concrete base, called the ____, supporting foundation walls.

Correct AnswerverifiedShow Answer

The lengths of the boundaries are noted ____.

Correct AnswerverifiedShow Answer

A(n) ____ plan gives information about the site on which the building is to be constructed.

Correct AnswerverifiedShow Answer

The Committee on the Environment was formed in 1989 by the ____.

Correct AnswerverifiedShow Answer

The girder is shown on the foundation plan by ____ lines and a note describing it.

Correct AnswerverifiedShow Answer

Floor plans show how the building is divided into rooms and how to get from one room to another.

Correct AnswerverifiedShow Answer

On frame construction, exterior walls are usually dimensioned to the ____.

Correct AnswerverifiedShow Answer

Surveyors and engineers usually work with feet and inches.

Correct AnswerverifiedFalse

Each floor of the building ____.

Correct AnswerverifiedShow Answer

The lengths of the boundaries are noted next to the ___________ symbol.

Correct AnswerverifiedShow Answer

When the footing-and-wall-type foundation is used, ____ are used to provide intermediate support to the structure above.

Correct AnswerverifiedC

The property line is usually a ____.

Correct AnswerverifiedShow Answer

____ are given for the sizes and locations of all walls, partitions, doors, windows, and other important features.

Correct AnswerverifiedShow Answer

Cabinets are explained further by ____.

Correct AnswerverifiedShow Answer

A floor plan is a(n) ____ view taken at a height that shows the placement of walls, windows, doors, cabinets, and other important features.

Correct AnswerverifiedShow Answer

Site dimensions are usually stated in ____.

Correct AnswerverifiedShow Answer

The floor plan includes as much information as possible without making it cluttered and hard to read.

Correct AnswerverifiedTrue

Windows and doors may be dimensioned about ____.

Correct AnswerverifiedShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
False

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
C

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
True

Correct Answer
verified